Main Facilities
Introduction of Atsuita Press Industry Co., Ltd’s Facilities
Atsuita Press Industry Co., Ltd. has all of the facilities necessary for bending, spinning, and stamping.
We own five hydraulic press facilities, which are necessary for stamping, throughout Japan.
We own four spinning facilities.
The unique technologies of these facilities enable bending, spinning, and stamping.
We own approximately 80 machines, which enables us to provide our services at low cost and with short lead-times.
If you are interested in Atsuita Press Industry Co., Ltd.’s unique bending, spinning, or stamping technologies, please contact us. We are happy to assist you with your needs.
Headquarters Factory
| Site Area |
3050㎡ |
| Production Workers |
29 |
Machining Facilities
| Name |
Number |
Notes |
| 2500-Ton Hydraulic Press |
1 |
|
| 1500-Ton Hydraulic Press |
1 |
|
| 1000-Ton Hydraulic Press |
1 |
|
| 500-Ton Hydraulic Press |
1 |
|
| Heating Furnace |
1 |
3600 mm width × 4200 mm
depth × 1500 mm height |
| Crane |
15 |
Maximum Load: 10 tons |
| Arc Welding Machine |
8 |
|
Semi-Automatic Welding Machinea
(MIG/MAG) |
7 |
|
| TIG Welding Machine |
2 |
|
| Plasma Cutter |
2 |
Cuttable SheetThickness: Max 90t |
| Gas Cutter |
6 |
Cuttable SheetThickness: Max 200t |
Iga Factory
| Site Area |
3565㎡ |
| Production Workers |
11 |
Machining Facilities
| Name |
Number |
Notes |
| F1 Spin-Forming Machine |
1 |
Maximum machinable area:φ4500×1300H ×16t |
| F0 Spin-Forming Machine |
1 |
Maximum machinable area:φ3800×1800H ×35t |
| F2 Spin-Forming Machine |
1 |
Maximum machinable area:φ1250×800H ×6t |
| F3 Spin-Forming Machine |
1 |
Maximum machinable area:φ1500×600H ×9t |
| 300-Ton Hydraulic Press |
1 |
|
| Bending Roll |
3 |
Maximum machinable width:3050 mm × 16t |
| Crane |
5 |
Maximum load: 10tons |
| Arc Welding Machine |
6 |
|
| Semi-Automatic Welding Machine (MIG/MAG) |
6 |
|
| TIG Welding Machine |
3 |
|
| Plasma Cutter |
1 |
Cuttable Sheet Thickness: Max60t |
| NC Plasma Cutter |
1 |
Cuttable Dimensions: 2500 mm×6200mm×Max25t |
| Gas Cutter |
6 |
Cuttable Sheet Thickness: Max200t |
Awaji Factory
| Site Area |
15000㎡ |
| Production Workers |
8 |
Machining Facilities
| Name |
Number |
Notes |
| 4100 -Ton Hydraulic Press |
3 |
|
| TIG Welding Machine |
1Gate |
width 9000mm |
| Semi-Automatic Welding Machinea |
5 |
|
| Plasma Cutter |
1 |
MAX60㎜ |
| Cranes |
4 |
Maximum load: 30 ton |
| Assembly surface plate |
2 |
15ｍ×15ｍ |
| In-plant transport equipment |
1 |
30 ton self-propelled truck |
| Marine shipping and receiving cranes |
1 |
Maximum load: 30 ton |
Certifications Obtained
Welding Certifications
| Type of Steel |
Welding Method |
Sheet Thickness |
Position |
Certification Type |
Number of People |
| Carbon Steel |
Shielded metal arc welding |
Thick |
Flat position |
N-3F |
8 |
| Carbon Steel |
Shielded metal arc welding |
Thick |
Vertical position |
N-3V |
2 |
| Carbon Steel |
Shielded metal arc welding |
Thick |
Horizontal position |
N-3H |
4 |
| Carbon Steel |
TIG welding |
Thick |
Flat position |
T-1F |
1 |
| Carbon Steel |
MAG welding |
Medium |
Flat position |
SN-2F |
2 |
| Stainless Steel |
MIG/MAG welding |
Medium |
Flat position |
MN-F |
4 |
| Stainless Steel |
TIG welding |
Thin |
Flat position |
TN-F |
3 |
| Aluminum |
MIG welding |
Thick |
Flat position |
MN-3F |
1 |
| Aluminum |
MIG welding |
Medium |
Flat position |
MN-2F |
2 |
| Aluminum |
TIG welding |
Thin |
Flat position |
TN-1F |
1 |
| NK Normal Steel |
Manual welding |
No limit |
Flat position |
CS-M-A-3-F |
1 |
| NK Normal Steel |
Semi-automatic welding |
No limit |
Flat position |
CS-S-A-3-F |
1 |
| Ordinary Boiler Welder |
3 |
| Welding Work Instructor |
1 |
Approval of Welding Method
Other
| Non-Destructive Test Engineer |
Welding Removability Penetrant Inspection: Level 2 |
3 |
| Non-Destructive Test Engineer |
Ultrasonic Thickness Measurement: Level 1 |
2 |
Introduction of Facilities
Exterior/Interior Appearance
Facility Machinery
